1. Equipped with SUN Automation lead edge feeding technology for all corrugated substrates
2. Feeding section through vacuum transfer instead of kicker feed to enhance transmission stability and accuracy
3. Adjustable extended stroke providing a smooth feeding performance
4. Production speed up to 10,800 pcs per hour
5. High strength steel linear slide motion for stable and reliable performance
6. Half-cut quick change and easy maintenance feeder wheels
7. Chromate-treated mechanism for better corrosion resistance and friction reduction

1. A chamber doctor blade ink distribution system (one blade for metering the anilox roll and one blade for ink containment).
2. The residual ink on the anilox roll is kept below 500g.
3. Precise print plate return position and register setting.
4. Print cylinder lateral movement range: 10mm.
5. Pneumatically controlled anilox ink transfer timing.
6. Press a button for automatic ink washing system.
7. Easy and quick ink blade change system.
8. Color registration tolerance range: ±0.5mm.
9. Motorized quick-lock printing plate.
10. Equipped with a peristaltic pump for ink supply management.

1. High precision synchronized movement of moveable plates, lead screw and linear guideway
2. Double shafts slotting unit, no carton height limitation
3. Chromate-treated, corrosion resistance carbon alloy steel knife shaft
4. Slotting knife base registration adjustment range: ± 1mm
5. Adjustable center slotting knife position based on carton types
6. Glue tab strength device
7. 4 pairs of shafts: Pre-creaser→Trailing Knife→Creaser→Leading Knife
8. Waste conveyor system

1. Motorized lateral movement of anvil roll to extend the life of anvil roll cover.
2. Feature of resurfacing of anvil rubber roll cover
3. 9 sections of speed compensation of the anvil roll
4. Anvil and cutting cylinders with consistent rotation speed for a long service life.
5. 10 minutes to complete anvil cover trimming with a rotary trimmer blade
6. Die cutting accuracy range: 1mm
7. Quick lock-up and release cutting plate device
8. Waste conveyor system

1. Combined with counting, vibrating, servo controlled conveying table and stacking
2. Dual vibrating shafts with round belt, air wipe, air press fan and waste removing brush
3. Air blowpipes device

1. Combined with counting, vibrating, servo controlled conveying table and stacking
2. Counting device through optical sensors

1. Combined with counting, vibrating, servo controlled conveying table and stacking
2. Conveyor platform with multiple output function to divide the platform into four different modes
3. Pneumatic controlled conveyor platform

1. Combined with counting, vibrating, servo controlled conveying table and stacking
2. Auto side squaring function for stack alignment
3. Computerized auto position setting plywood feeder
4. Waste conveyor system
5. Pneumatic controlled conveyor platform features with single-row and counted stack
6. Servo driven fork mechanism

1. Equipped with SUN Automation lead edge feeding technology for various corrugated substrates
2. Feeding section through vacuum transfer system instead of kicker feed to enhance transmission stability and accuracy
3. Adjustable extended stroke providing a smooth feeding performance
4. Production speed up to 24,000 pcs per hour
5. Automatic cardboard sheet feeding with double-sided squaring device
6. High strength steel linear slide motion for stable and reliable performance
7. Half-cut quick change and easy maintenance feeder wheels
8. Chromate-plated mechanism for corrosion resistance and friction reduction

1. Rubber wipe roll ink distribution system
2. Precise print plate return position and register setting
3. Print cylinder lateral movement range: 10mm
4. Precise control of ink transfer timing
5. Automatic ink washing system
6. Color registration tolerance range: ± 0.5mm
7. Manual printing plate quick-lock mechanism
8. Peristaltic pump for ink supply management

Advanced Optional Features:
1. A chamber doctor blade ink distribution systems (one blade for metering the anilox roll and one blade for ink containment.)
2. The amount of the residual ink on the anilox roll under 500g with the chamber doctor blade
3. Easy and quick ink blade change system
4. Quick print plate mounting while others are running

1. The ball screw mechanism facilitates the lateral movement of the cylindrical shaft and linkage plates.
2. Slotting and creasing mechanism with additional sheet supporting shafts
3. Chromate-plated, corrosion resistance slotting shafts
4. Slotting knife base register adjustment range: ± 1mm
5. Fixed center slotting knife position
6. Glue tab strength device
7. Waste conveyor system

1. Automatic adjusted feeding section ensures a continuous and steady production flow
2. A gluing unit with inside and outside glue tabs applications Shark fin-like folding belt
3. Adjustable upper and lower folding belt gaps
4. Adjustable lower folding rod gaps
5. Extended vacuum suction to stable conveying and enhance the accuracy in folding.

1. Servo controlled counting and ejecting features
2. Up to 25 pcs per bundle
3. 3 sections of pressure blower fan

1. Equipped with SUN Automation 4-shaft lead edge feeding technology for all corrugated substrates
2. Feeding section through vacuum transfer to enhance transmission stability and accuracy
3. Servo feeding system (optional)
4. Adjustable extended stroke providing a smooth feeding performance
5. Production speed up to 250 pcs per minute, 15,000 pcs per hour
6. High strength steel linear slide motion for stable and reliable performance
7. Half-cut quick change and easy maintenance feeder wheels (optional)
8. Chromate-treated mechanism for better corrosion resistance and friction reduction
9. Vacuum suction range adjusts automatically
10. Automatic activate frame
11. Anti-roll safety device

1. Two-roll or chamber doctor blade (optional) ink distribution systems
2. The low residual ink level on the anilox roll
3. Precise print plate return position and register setting
4. Electrically adjustable lateral movement of the print cylinder ±10mm
5. Pneumatically controlled anilox ink transfer timming
6. Press a button for auto ink washing system
7. Easy and quick ink blade change system
8. Color registration tolerance range: ±0.5mm
9. Motorized quick-lock printing plate (optional)
10. Employed with peristaltic pump for ink supply management (optional)
11. Protective device with entry detection
12. Finger-pinch prevention design

1. High precision synchronized movement of moveable plates, lead screw and linear guideway
2. Double-shaft slotting unit, no restrictions on box height
3. 4 pairs of shafts: Pre-creaser→Trailing Knife→Creaser→Leading Knife
4. Chromate-treated, corrosion resistance carbon alloy steel knife shaft
5. Slotting knife base registration adjustment range: ±1mm
6. Adjustable center slotting knife position based on carton types
7. Glue tab strength device
8. Slitting knife cutting into strip pieces to prevent scraps from causing jams
9. Waste conveyor system

Optional Mechanisms:
1. Single-shaft slotting with a dual creaser unit, creasing and pre-creasing wheels suitable for various flute types
2. 4 pairs of shafts: Pre-creaser→Pre-creaser→Creaser→Leading and Trailing Knives
3. With limitation on box height

1. Motorized lateral movement of anvil roll to extend the life of anvil roll cover.
2. Feature of resurfacing of anvil rubber roll cover with a sandpaper roll.
A trimming blade is also available upon request.
3. The anvil cylinder with 7 sections of speed compensation functionality
4. Maintaining a linear speed for both anvil and die-cutting cylinders contributes to an extended service life for the anvil roll cover.
5. Electrically adjustable lateral movement of the die-cut cylinder ±10mm
6. Die cutting accuracy range ±1mm
7. Quick lock-up and release cutting plate device
8. Waste conveyor system
9. Ejector pins for scrap removal from blanks (Optional)
10. Air blowpipes device

1. Suction conveying table (Optional)
2. Auto side squaring function for stack alignment
3. Computerized auto position setting plywood feeder
4. Automatic lifting conveyor table

1. Equipped with servo-driven feeding system, capable of adapting to various corrugated board conditions
2. Feeding section through vacuum transfer to enhance transmission stability and accuracy
3. Adjustable extended stroke providing a smooth feeding performance
4. Production speed up to 300 pcs per minute, 18,000 pcs per hour
5. High strength steel linear slide motion for stable and reliable performance
6. Half-cut quick change and easy maintenance feeder wheels (optional)
7. Chromate-treated mechanism for better corrosion resistance and friction reduction

1. Doctor chamber blade ink distribution systems
2. The low residual ink level on the anilox roll
3. Precise print plate return position and register setting
4. Electrically adjustable lateral movement of the print cylinder ±10mm
5. Pneumatically controlled anilox ink transfer timming
6. Press single button for auto ink washing system
7. Easy and quick ink blade changing system
8. Color registration tolerance range: ± 0.5mm
9. Motorized quick-lock printing plate (optional)
10. Low ink auto-detect system
11. Protective device with entry detection

1. High precision synchronized movement of moveable plates, lead screw and linear guideway
2. Linkage plates securely fasten the slotting knife bases and creasing wheels, effectively minimizing consumable costs associated with latera motion of the slotting knives.
3. Double-shaft slotting unit, no restrictions on box height
4. Chromate-treated, corrosion resistance carbon alloy steel knife shaft
5. Slotting knife base registration adjustment range: ± 1mm
6. Adjustable center slotting knife position based on carton types
7. Glue tab strength device
8. Achieving pre-creasing forced strengthened and enhanced creasing strength
9. Waste conveyor system

1. Utilizing servo-driven T-shaped single touchpoint, assisting folding belts to enhance precision in the folding process
2. Adjustable upper and lower folding belt gaps
3. Adjustable lower folding rod gaps
4. Extended vacuum suction to stable conveying and enhance the accuracy in folding
5. Automatic adjusted feeding section ensures a continuous and steady production flow
6. Adjustable glue wheel with inside and outside glue tabs applications

1. Servo controlled counting and ejecting features
2. Up to 25 pcs per bundle
3. 3 sections of pressure blower fan